< PreviousSuperior Reliability & Performance 38 OBIS LX/LS Life Sciences Guide OBIS LX/LS SPECIFICATIONS OBIS 750LX OBIS 785LX OBIS 808LX OBIS 980LX Wavelength 1 (nm) 750785808980 Output Power 2 (mW)20100150100, 150 Spatial ModeTEM 00 TEM 00 TEM 00 TEM 00 M 2 (Beam Quality) 3 ≤1.2≤1.2≤1.2≤1.3 Beam Asymmetry≤1:1.2≤1:1.2≤1:1.2≤1:1.3 Beam Diameter at 1/e 2 (mm)0.7 ±0.10.7 ±0.10.7 ±0.10.7 ±0.1 Beam Divergence (mrad, full-angle)<1.7<1.7<2.1<2.8 Pointing Stability (μrad) (over 2 hours after warm-up and ±3°C) <30<30<30<30 Pointing Stability Over Temp. (μrad/°C)<5<5<5<5 RMS Noise (%) (20 Hz to 20 MHz)≤0.05≤0.05≤0.05≤0.05 Peak-to-Peak Noise (%) (20 Hz to 20 kHz)<0.5<0.5<0.5<0.5 Long-term Power Stability (%) (8 hrs., ±3°C)<2<2<2<2 Warm-up Time 4 (minutes) (from cold start)<5<5<5<5 Polarization RatioMinimum 50:1, Horizontal ±10° Minimum 100:1, Vertical ±5° Minimum 50:1, Vertical ±5° Minimum 100:1, Vertical ±5° Laser Drive ModesCW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%) (nsec) Fall Time (90% to 10%) (nsec) Modulation Depth (extinction ratio) 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%) (nsec) Fall Time (90% to 10%) (nsec) Modulation Depth (extinction ratio) 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 Static Alignment Tolerances Beam Position from Reference 5 (mm) Beam Angle 5 (mrad) Beam Waist Position at Exit Window (mm) <1 <5 n/a <1 <5 n/a <1 <5 n/a <1 <5 n/a Laser Safety Classification3b3b3b3b ESD ProtectionEN61326-1EN61326-1EN61326-1EN61326-1 Power Consumption (W)Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Laser Head Baseplate Temp. (Max., °C)50505050 Heat Dissipation of Laser Head 6 (W)Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Ambient Temperature 7 Operating Condition 8 (°C) Non-operating Condition (°C) 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 Shock Tolerance (g) (6 ms)30303030 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range; 445LX at 365 mW with a 435 nm to 450 nm range; 458LX at 365 mW with a 450 nm to 465 nm range; 522LX with a 520 nm to 530 nm range; 633LX with a 629 nm to 636 nm range; 640LX with 635 nm to 644 nm range; 660LX with 652 nm to 665 nm range; and 685LX, 730LX, 750LX, 785LX, 808LX, and 980LX with a ±10 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. For LS versions all residual laser emission at 808 nm pumplight or fundamental <0.1 mW. 3 For LX versions the M 2 measured with ModeMaster with 90/10 clip levels. 4 For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay of 0.1 minutes. 5 See mechanical drawing for exit beam location. 6 Typically 85% of heat load through the base plate. See Users Manual for more detail. 7 Non-Condensing. See User Manual for more detail. 8 For LS versions laser head baseplate temperature needs to be maintained at ≤40°C.coherent.com 39 Life Sciences Guide OBIS LX/LS OBIS LX/LS UTILITY AND ENVIRONMENTAL REQUIREMENTS Operating Voltage 1 (VDC)12 ±2 Dimensions (L x W x H) Laser OBIS Remote (optional) DC Power Supply (optional) Cable, Laser to OBIS Remote (optional) 70 x 40 x 38 mm (2.75 x 1.57 x 1.5 in.) 105 x 68 x 36 mm (4.13 x 2.68 x 1.42 in.) 105 x 42 x 33 mm (4.13 x 1.65 x 1.3 in.) 1 m (3.28 ft.) (3 meter and 0.3 meter sold separately) Weight Laser OBIS Remote (optional) DC Power Supply (optional) Cable, Laser to OBIS Remote (optional) 0.16 kg (0.35 lbs.) 0.24 kg (0.53 lbs.) 0.36 kg (0.79 lbs.) 0.1 kg (0.22 lbs.) for 1 meter 1 If user supplied, the DC power supply has to meet the following requirements: power >20W; ripple <5% peak-to-peak; line regulation <0.5%. MECHANICAL SPECIFICATIONS OBIS LX/LS 38 mm (1.5 in.) Status Indicator Safety Shutter Laser Exit Aperture M6 X 0.75 Thread 2.54 mm Deep OEM Label Fan USB SDR Power 40 mm (1.57 in.) 19 mm (0.75 in.) 15.5 mm (0.61 in.) 70 mm (2.76 in.) 3 mm (0.12 in.) 64 mm (2.52 in.) 5 mm (0.2 in.) 30 mm (1.18 in.) 4X Ø3.18 mm (0.13 in.) Thru Top View Front View Rear View with OEM Label Removed Rear ViewSuperior Reliability & Performance 40 OBIS LX/LS FP OBIS LX/LS FP Fiber Pigtailed Lasers in a Plug-and-Play Platform The OBIS LX/LS Fiber Pigtailed (OBIS FP) suite of lasers delivers the simplicity of a plug-and-play platform for a wide range of wavelengths from the violet to the near IR. The fiber pigtail termination is complete with a FC/APC connector. The OBIS LX/LS FP lasers are based on the OBIS LX/LS laser platform, offering the same speed-to-market benefits. The OBIS LX/LS FP lasers offer superior performance, reliability, and hands-free operation. These lasers combine single-mode polarization maintaining fiber with an FC/APC connector for a high-quality low-noise laser beam output. They utilize proprietary fiber technology to provide superior lifetimes, and permanent fiber attachments for guaranteed power over time. OBIS LX/LS FP lasers are also compatible with MetaMorph and µManager Software for microscopy automation and image analysis. FEATURES & BENEFITS • All OBIS advantages with fiber delivery • Single mode, polarization maintaining fiber • Extended life fiber design APPLICATIONS • Confocal Microscopy • DNA Sequencing • Flow Cytometry • Medical Imaging and Instrumentationcoherent.com 41 Life Sciences Guide OBIS LX/LS FP OBIS LX/LS FP SPECIFICATIONS OBIS FP 375LX OBIS FP 405LX OBIS FP 413LX OBIS FP 445LX Wavelength 1 (nm) 375405413445 Output Power 2 (mW) 2550, 1005045, 200 Output from FiberFC/APC; 8° angled 8 FC/APC; 8° angled 8 FC/APC; 8° angled 8 FC/APC; 8° angled 8 Fiber Cable Type3 mm Mono-Coil3 mm Mono-Coil3 mm Mono-Coil3 mm Mono-Coil Fiber Cable Length (m) (minimum)11 (optional 2 m)11 Fiber Numerical Aperture (NA) (1/e 2 )0.050.050.050.05 Fiber Core Diameter (µm) (typical)3.53.53.53.5 Spatial Mode TEM 00 TEM 00 TEM 00 TEM 00 M 2 (Beam Quality) 3 ≤1.1≤1.1≤1.1≤1.1 Beam Asymmetry≤1:1.1≤1:1.1≤1:1.1≤1:1.1 RMS Noise (%) (20 Hz to 20 MHz)≤0.2≤0.2≤0.2≤0.2 Peak-to-Peak Noise (%) (20 Hz to 20 kHz)≤2≤2≤2≤2 Long-term Power Stability (%) (8 hrs., ±3°C) <2<2<2<2 Long-term Output Power Average (%/hrs.)≤10/1000≤5/1000≤5/1000≤5/1000 Warm-up Time 4 (minutes) (from cold start)<5<5<5<5 Polarization RatioMinimum 50:1Minimum 100:1Minimum 100:1Minimum 100:1 Laser Drive ModesCW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%) (nsec) Fall Time (90% to 10%) (nsec) Modulation Depth (extinction ratio) 75 <5 <5 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%) (nsec) Fall Time (90% to 10%) (nsec) Modulation Depth (extinction ratio) 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 Laser Safety Classification3b3b3b3b ESD Protection EN61326-1EN61326-1EN61326-1EN61326-1 Power Consumption (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Laser Head Baseplate Temperature (Max., °C)50505050 Heat Dissipation of Laser Head 5 (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Ambient Temperature 6 Operating Condition 7 (°C) Non-operating Condition (°C) 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 Shock Tolerance (g) (6 ms) 30303030 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range; 445LX at 200 mW with a 435 nm to 450 nm range; 458LX at 200 mW with a 450 nm to 465 nm range; 522LX with a 520 nm to 530 nm range; 633LX with a 629 nm to 636 nm range; 640LX with 635 nm to 644 nm range; 660LX with 652 nm to 665 nm range; and 685LX, 730LX, 750LX, 785LX, 808LX, and 980LX with a ±10 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. 3 M 2 measured with ModeMaster with 90/10 clip levels. 4 For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay of 0.1 minutes. 5 Typically 85% of heat load through the base plate. See Users Manual for more detail. 6 Non-Condensing. See User Manual for more detail. 7 For LS versions laser head baseplate temperature needs to be maintained at ≤40°C. 8 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.Superior Reliability & Performance 42 OBIS LX/LS FP Life Sciences Guide OBIS LX/LS FP SPECIFICATIONS OBIS FP 458LX OBIS FP 473LX OBIS FP 488LX OBIS FP 488LS Wavelength 1 (nm) 458473488488 Output Power 2 (mW) 2005030, 100 15 40, 60, 80, 120 Output from FiberFC/APC; 8° angled 8 FC/APC; 8° angled 8 FC/APC; 8° angled 8 FC/APC; FC/APC; 8° angled 8° angled 8 Fiber Cable Type3 mm Mono-Coil 3 mm Mono-Coil 3 mm Mono-Coil 5 mm Protective Tubing Fiber Cable Length (m) (minimum)1110.94 Fiber Numerical Aperture (NA) (1/e 2 )0.050.050.05 0.1 0.06 Fiber Core Diameter (µm) (typical)3.53.53.54 Spatial Mode TEM 00 TEM 00 TEM 00 TEM 00 M2 (Beam Quality) 3 ≤1.1≤1.1≤1.1≤1.1 Beam Asymmetry≤1:1.1≤1:1.1≤1:1.1≤1:1.1 RMS Noise (%) (20 Hz to 20 MHz)≤0.2≤0.2≤0.2≤0.25 Peak-to-Peak Noise (%) (20 Hz to 20 kHz)≤2≤2≤2≤1 Long-term Power Stability (%) (8 hrs., ±3°C) <2<2<2<2 Long-term Output Power Average (%/hrs.)≤5/1000≤4/1000≤4/1000– Warm-up Time 4 (minutes) (from cold start)<5<5<5<5 Polarization RatioMinimum 100:1Minimum 100:1Minimum 100:1Minimum 100:1 Laser Drive ModesCW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%) (nsec) Fall Time (90% to 10%) (nsec) Modulation Depth (extinction ratio) 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 0.05 <18,000 <2000 Infinite at 0 Hz to 50 kHz Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%) (nsec) Fall Time (90% to 10%) (nsec) Modulation Depth (extinction ratio) 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 Laser Safety Classification3b3b3b3b ESD Protection EN61326-1EN61326-1EN61326-1EN61326-1 Power Consumption (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Laser Head Baseplate Temperature (Max., °C)50505050 Heat Dissipation of Laser Head 5 (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Ambient Temperature 6 Operating Condition 7 (°C) Non-operating Condition (°C) 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 Shock Tolerance (g) (6 ms) 30303030 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range; 445LX at 200 mW with a 435 nm to 450 nm range; 458LX at 200 mW with a 450 nm to 465 nm range; 522LX with a 520 nm to 530 nm range; 633LX with a 629 nm to 636 nm range; 640LX with 635 nm to 644 nm range; 660LX with 652 nm to 665 nm range; and 685LX, 730LX, 750LX, 785LX, 808LX, and 980LX with a ±10 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. 3 M 2 measured with ModeMaster with 90/10 clip levels. 4 For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay of 0.1 minutes. 5 Typically 85% of heat load through the base plate. See Users Manual for more detail. 6 Non-Condensing. See User Manual for more detail. 7 For LS versions laser head baseplate temperature needs to be maintained at ≤40°C. 8 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.coherent.com 43 Life Sciences Guide OBIS LX/LS FP OBIS LX/LS FP SPECIFICATIONS OBIS FP 505LX OBIS FP 514LX OBIS FP 514LS OBIS FP 522LX Wavelength 1 (nm) 505514514522 Output Power 2 (mW) 40301525 Output from FiberFC/APC; 8° angled 8 FC/APC; 8° angled 8 FC/APC; 8° angledFC/APC; 8° angled 8 Fiber Cable Type3 mm Mono-Coil 3 mm Mono-Coil 5 mm Protective Tubing 3 mm Mono-Coil Fiber Cable Length (m) (minimum)110.941 Fiber Numerical Aperture (NA) (1/e 2 )0.050.050.10.05 Fiber Core Diameter (µm) (typical)3.54.544.5 Spatial Mode TEM 00 TEM 00 TEM 00 TEM 00 M 2 (Beam Quality) 3 ≤1.1≤1.1≤1.1≤1.1 Beam Asymmetry≤1:1.1≤1:1.1≤1:1.1≤1:1.1 RMS Noise (%) (20 Hz to 20 MHz)≤0.2≤0.25≤0.2≤0.25 Peak-to-Peak Noise (%) (20 Hz to 20 kHz)≤2≤2≤1≤2 Long-term Power Stability (%) (8 hrs., ±3°C) <2<2<2≤2 Long-term Output Power Average (%/hrs.)≤4/1000≤3/1000–≤3/1000 Warm-up Time 4 (minutes) (from cold start)<5<5<5<5 Polarization RatioMinimum 100:1Minimum 100:1Minimum 100:1Minimum 100:1 Laser Drive ModesCW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%) (nsec) Fall Time (90% to 10%) (nsec) Modulation Depth (extinction ratio) 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 100 <3.5 <2 >1,000,000:1 at 0 Hz, >250:1 at 100 MHz 0.05 <18,000 <2000 Infinite at 0 Hz to 50 kHz 100 <3.5 <2 >1,000,000:1 at 0 Hz, >250:1 at 100 MHz Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%) (nsec) Fall Time (90% to 10%) (nsec) Modulation Depth (extinction ratio) 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 100 <3000 <3000 >50:1 500 <700 <700 >1,000,000:1 Laser Safety Classification3b3b3b3b ESD Protection EN61326-1EN61326-1EN61326-1EN61326-1 Power Consumption (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 8, Max. 12 Typical 5, Max. 13 Laser Head Baseplate Temperature (Max., °C)50504050 Heat Dissipation of Laser Head 5 (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 8, Max. 12 Typical 5, Max. 13 Ambient Temperature 6 Operating Condition 7 (°C) Non-operating Condition (°C) 10 to 50 -20 to 60 10 to 50 -20 to 60 15 to 40 -20 to 60 10 to 50 -20 to 60 Shock Tolerance (g) (6 ms) 30303030 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range; 445LX at 200 mW with a 435 nm to 450 nm range; 458LX at 200 mW with a 450 nm to 465 nm range; 522LX with a 520 nm to 530 nm range; 633LX with a 629 nm to 636 nm range; 640LX with 635 nm to 644 nm range; 660LX with 652 nm to 665 nm range; and 685LX, 730LX, 750LX, 785LX, 808LX, and 980LX with a ±10 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. 3 M 2 measured with ModeMaster with 90/10 clip levels. 4 For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay of 0.1 minutes. 5 Typically 85% of heat load through the base plate. See Users Manual for more detail. 6 Non-Condensing. See User Manual for more detail. 7 For LS versions laser head baseplate temperature needs to be maintained at ≤40°C. 8 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.Superior Reliability & Performance 44 OBIS LX/LS FP Life Sciences Guide OBIS LX/LS FP SPECIFICATIONS OBIS FP 532LS OBIS FP 552LS OBIS FP 561LS OBIS FP 594LS Wavelength 1 (nm) 532552561594 Output Power 2 (mW) 20 40, 60, 80, 120 15 40, 60, 80, 120 40, 60, 80, 12040 Output from FiberFC/APC; 8° angled 8 FC/APC; 8° angled 8 FC/APC; 8° angled 8 FC/APC; 8° angled 8 Fiber Cable Type5 mm Protective Tubing 5 mm Protective Tubing 5 mm Protective Tubing 5 mm Protective Tubing Fiber Cable Length (m) (minimum)0.940.940.940.94 Fiber Numerical Aperture (NA) (1/e 2 )0.1 0.060.1 0.060.060.06 Fiber Core Diameter (µm) (typical)4444 Spatial Mode TEM 00 TEM 00 TEM 00 TEM 00 M2 (Beam Quality) 3 ≤1.1≤1.1≤1.1≤1.1 Beam Asymmetry≤1:1.1≤1:1.1≤1:1.1≤1:1.1 RMS Noise (%) (20 Hz to 20 MHz)≤0.25≤0.25≤0.25≤0.25 Peak-to-Peak Noise (%) (20 Hz to 20 kHz)≤1≤1≤1≤1 Long-term Power Stability (%) (8 hrs., ±3°C) <2<2<2≤2 Long-term Output Power Average (%/hrs.)–––– Warm-up Time 4 (minutes) (from cold start)<5<5<5<5 Polarization RatioMinimum 100:1Minimum 100:1Minimum 100:1Minimum 100:1 Laser Drive ModesCW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%) (nsec) Fall Time (90% to 10%) (nsec) Modulation Depth (extinction ratio) 0.05 <18,000 <2000 Infinite at 0 Hz to 50 kHz 0.05 <18,000 <2000 Infinite at 0 Hz to 50 kHz 0.05 <18,000 <2000 Infinite at 0 Hz to 50 kHz 0.05 <18,000 <2000 Infinite at 0 Hz to 50 kHz Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%) (nsec) Fall Time (90% to 10%) (nsec) Modulation Depth (extinction ratio) 100 <3000 <3000 >50:1 100 <3000 <3000 >50:1 100 <3000 <3000 >50:1 100 <3000 <3000 >50:1 Laser Safety Classification3b3b3b3b ESD Protection EN61326-1EN61326-1EN61326-1EN61326-1 Power Consumption (W) Typical 8, Max. 12 Typical 8, Max. 12 Typical 8, Max. 12 Typical 8, Max. 12 Laser Head Baseplate Temperature (Max., °C)40404040 Heat Dissipation of Laser Head 5 (W) Typical 8, Max. 12 Typical 8, Max. 12 Typical 8, Max. 12 Typical 8, Max. 12 Ambient Temperature 6 Operating Condition 7 (°C) Non-operating Condition (°C) 15 to 40 -20 to 60 15 to 40 -20 to 60 15 to 40 -20 to 60 15 to 40 -20 to 60 Shock Tolerance (g) (6 ms) 30303030 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range; 445LX at 200 mW with a 435 nm to 450 nm range; 458LX at 200 mW with a 450 nm to 465 nm range; 522LX with a 520 nm to 530 nm range; 633LX with a 629 nm to 636 nm range; 640LX with 635 nm to 644 nm range; 660LX with 652 nm to 665 nm range; and 685LX, 730LX, 750LX, 785LX, 808LX, and 980LX with a ±10 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. 3 M 2 measured with ModeMaster with 90/10 clip levels. 4 For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay of 0.1 minutes. 5 Typically 85% of heat load through the base plate. See Users Manual for more detail. 6 Non-Condensing. See User Manual for more detail. 7 For LS versions laser head baseplate temperature needs to be maintained at ≤40°C. 8 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.coherent.com 45 Life Sciences Guide OBIS LX/LS FP OBIS LX/LS FP SPECIFICATIONS OBIS FP 633LX OBIS FP 637LX OBIS FP 640LX Wavelength 1 (nm) 633637640 Output Power 2 (mW) 50100, 12075 Output from FiberFC/APC; 8° angled FC/APC; 8° angled FC/APC; 8° angled Fiber Cable Type3 mm Mono-Coil3 mm Mono-Coil3 mm Mono-Coil Fiber Cable Length (m) (minimum)111 Fiber Numerical Aperture (NA) (1/e 2 )0.090.090.09 Fiber Core Diameter (µm) (typical)4.54.54.5 Spatial Mode TEM 00 TEM 00 TEM 00 M 2 (Beam Quality) 3 ≤1.1≤1.1≤1.1 Beam Asymmetry≤1:1.1≤1:1.1≤1:1.1 RMS Noise (%) (20 Hz to 20 MHz)≤0.2≤0.2≤0.2 Peak-to-Peak Noise (%) (20 Hz to 20 kHz)≤2≤2≤2 Long-term Power Stability (%) (8 hrs., ±3°C) <2<2<2 Long-term Output Power Average (%/hrs.)≤3/1000≤3/1000≤3/1000 Warm-up Time 4 (minutes) (from cold start)<5<5<5 Polarization RatioMinimum 100:1Minimum 100:1Minimum 100:1 Laser Drive ModesCW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%) (nsec) Fall Time (90% to 10%) (nsec) Modulation Depth (extinction ratio) 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%) (nsec) Fall Time (90% to 10%) (nsec) Modulation Depth (extinction ratio) 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 Laser Safety Classification3b3b3b ESD Protection EN61326-1EN61326-1EN61326-1 Power Consumption (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Laser Head Baseplate Temperature (Max., °C)505050 Heat Dissipation of Laser Head 5 (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Ambient Temperature 6 Operating Condition 7 (°C) Non-operating Condition (°C) 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 Shock Tolerance (g) (6 ms) 303030 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range; 445LX at 200 mW with a 435 nm to 450 nm range; 458LX at 200 mW with a 450 nm to 465 nm range; 522LX with a 520 nm to 530 nm range; 633LX with a 629 nm to 636 nm range; 640LX with 635 nm to 644 nm range; 660LX with 652 nm to 665 nm range; and 685LX, 730LX, 750LX, 785LX, 808LX, and 980LX with a ±10 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. 3 M 2 measured with ModeMaster with 90/10 clip levels. 4 For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay of 0.1 minutes. 5 Typically 85% of heat load through the base plate. See Users Manual for more detail. 6 Non-Condensing. See User Manual for more detail. 7 For LS versions laser head baseplate temperature needs to be maintained at ≤40°C.Superior Reliability & Performance 46 OBIS LX/LS FP Life Sciences Guide SPECIFICATIONS OBIS FP 647LX OBIS FP 660LX OBIS FP 785LX Wavelength 1 (nm) 647660785 Output Power 2 (mW) 1007570 Output from FiberFC/APC; 8° angled FC/APC; 8° angled FC/APC; 8° angled Fiber Cable Type3 mm Mono-Coil3 mm Mono-Coil3 mm Mono-Coil Fiber Cable Length (m) (minimum)111 Fiber Numerical Aperture (NA) (1/e 2 )0.090.090.12 Fiber Core Diameter (µm) (typical)4.54.54.5 Spatial Mode TEM 00 TEM 00 TEM 00 M 2 (Beam Quality) 3 ≤1.1≤1.1≤1.1 Beam Asymmetry≤1:1.1≤1:1.1≤1:1.1 RMS Noise (%) (20 Hz to 20 MHz)≤0.2≤0.2≤0.2 Peak-to-Peak Noise (%) (20 Hz to 20 kHz)≤2≤2≤2 Long-term Power Stability (%) (8 hrs., ±3°C) <2≤2≤2 Long-term Output Power Average (%/hrs.)≤3/1000≤3/1000≤3/1000 Warm-up Time 4 (minutes) (from cold start)<5<5<5 Polarization RatioMinimum 100:1Minimum 100:1Minimum 100:1 Laser Drive Modes Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%) (nsec) Fall Time (90% to 10%) (nsec) Modulation Depth (extinction ratio) 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%) (nsec) Fall Time (90% to 10%) (nsec) Modulation Depth (extinction ratio) 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 Laser Safety Classification3b3b3b ESD Protection EN61326-1EN61326-1EN61326-1 Power Consumption (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Laser Head Baseplate Temperature (Max., °C)505050 Heat Dissipation of Laser Head 5 (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Ambient Temperature 6 Operating Condition 7 (°C) Non-operating Condition (°C) 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 Shock Tolerance (g) (6 ms) 303030 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range; 445LX at 200 mW with a 435 nm to 450 nm range; 458LX at 200 mW with a 450 nm to 465 nm range; 522LX with a 520 nm to 530 nm range; 633LX with a 629 nm to 636 nm range; 640LX with 635 nm to 644 nm range; 660LX with 652 nm to 665 nm range; and 685LX, 730LX, 750LX, 785LX, 808LX, and 980LX with a ±10 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. 3 M 2 measured with ModeMaster with 90/10 clip levels. 4 For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay of 0.1 minutes. 5 Typically 85% of heat load through the base plate. See Users Manual for more detail. 6 Non-Condensing. See User Manual for more detail. 7 For LS versions laser head baseplate temperature needs to be maintained at ≤40°C.coherent.com 47 Life Sciences Guide OBIS LX/LS FP UTILITY AND ENVIRONMENTAL REQUIREMENTS Operating Voltage 1 (VDC)12 ±2 Dimensions (L x W x H) Laser OBIS Remote (optional) DC Power Supply (optional) Cable, Laser to OBIS Remote (optional) Fiber Minimum Bend Radius 70 x 40 x 38 mm (2.75 x 1.57 x 1.5 in.) 105 x 68 x 36 mm (4.13 x 2.68 x 1.42 in.) 105 x 42 x 33 mm (4.13 x 1.65 x 1.3 in.) 1 m (3.28 ft.) (3 meter and 0.3 meter sold separately) 51 mm (2.0 in.) Weight Laser OBIS Remote (optional) DC Power Supply (optional) Cable, Laser to OBIS Remote (optional) Fiber Tensile Load (max.) 0.23 kg (0.5 lbs.) 0.23 kg (0.5 lbs.) 0.36 kg (0.79 lbs.) 0.1 kg (0.22 lbs.) for 1 meter 1 kg (2.2 lbs.) 1 If user supplied, the DC power supply has to meet the following requirements: power >20W; ripple <5% peak-to-peak; line regulation <0.5%.Next >