< PreviousSuperior Reliability & Performance 148 OBIS LX/LS 6-Laser Remote Life Sciences Guide Accessories OBIS 6-Laser Remote Figure 1: Individual labels included for the laser wavelength identification. Figure 2: FRONT VIEW. The OBIS 6-Laser Remote comes with wavelength tags to identify each laser connected. 522320 785 413 405 375 422 458 473 514 505 488 450 395 360 532 830 445 450 8 9 0 1 2 3 4 5 6 7 750 980 808 561 635 594 588 637 650 647 640 660 685 552 730 633 355 349coherent.com 149 Life Sciences Guide OBIS LX/LS 6-Laser Remote Accessories OBIS 6-Laser Remote Figure 3: REAR VIEW. Six color coded power cables included. Interlock included. Laser sold separately. Figure 4: Single power supply included to drive six lasers with remote.Superior Reliability & Performance 150 OBIS LX/LS 6-Laser Remote Life Sciences Guide Accessories OBIS 6-Laser Remote Figure 5: Six remote-to-laser power cables (part #1209469) included. Color coded for easy installation and identification. One meter length. Figure 6: Power Supply (part # 1211389) with IEC-320 universal input. Includes On/Off switch. 46 13 189 mm (7.4 in.) 89.4 mm (3.5 in.) On/Off Switch Cable Length: 1220 mm ±25 mm (48.0 in. ±1 in.) Connector: 6-Pin Male Connector MOLEX Part # 43025-0600 6X Contact Pin MOLEX Part # 43030-009 Pins 1,2,3: Ground Pins 4,5,6: 12VDC IEC 320-C14 Input Receptacle Universal 90/264VAC Capable Input 47.1 mm (1.9 in.)coherent.com 151 Life Sciences Guide OBIS LX/LS 6-Laser Remote Accessories OBIS 6-Laser Remote OBIS LX/LS 6-Laser Remote with Mounting Brackets and Stacking Brackets, part # 1203909 (included with OBIS LX/LS 6-Laser Remote) Example of Stacking OBIS LX/LS 6-Laser Remotes (mounting bracket included, second remote sold separately) 126 mm (5.0 in.) 6.9 mm (0.3 in.) 6.4 mm (0.3 in.) 63.5 mm (2.5 in.) 50 mm (2.0 in.) 139.9 mm (5.5 in.) 108.1 mm (4.3 in.) 37.8 mm (1.5 in.) 4X 8.1 mm (0.3 in.) 4X 7.1 mm (0.3 in.) 4X Slotted Holes Top View Side ViewFront View 108.6 mm (4.3 in.) 75.7 mm (3.0 in.) Top View Side ViewFront ViewSuperior Reliability & Performance 152 Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all OBIS LX/LS 6-Laser Remotes. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. OBIS LX/LS 6-Laser Remote Life Sciences Guide Accessories MECHANICAL SPECIFICATIONS OBIS LX/LS 6-Laser Remote 104.9 mm (4.1 in.) 9.2 mm (0.4 in.) 2 Places 13.7 mm (0.5 in.) 2 Places 12 mm (0.5 in.) 2 Places 43.5 mm (1.7 in.) 2 Places 32 mm (1.3 in.) 35.9 mm (1.4 in.) 4X #4-40 Threads 2 Places, Near and Far Side 67.5 mm (2.66 in.) 16.2 mm (0.64 in.) 83.7 mm (3.30 in.) Top View Front View Side View Rear Viewcoherent.com 153 Accessories OBIS LX/LS Heat Sink Heat Sink with Fan for Thermal Management OBIS LX and OBIS LS laser products come with a variety of accessories to support your application needs. As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand- alone all-in-one laser solution. The OBIS laser comes with a Power Connection, USB Connection, Fan Connection and a SDR-type Connection for laser control I/O. All of these are located on the back panel of the OBIS LX/LS laser. To simplify integration, Coherent offers a separate OBIS LX/LS Heat Sink with an integrated fan. The Heat Sink offers a convenient way to raise the laser beam height off the table and provide thermal management. The fan simply plugs into the back of the OBIS LX or OBIS LS laser to receive 12V DC power from the OBIS LX or OBIS LS laser. FEATURES • Small footprint • Rugged design • Precision dowel pin laser positioning • Convenient 69 mm (2.7 inch) beam height • Integrated cooling fan with vibration isolation • Output beam centered on standard table bolt pattern • Universal mounting to imperial or metric bolt pattern • Proven stable performance over time and temperature • Fan power connector plugs directly to OBIS Laser Head • Laser can be mounted on top for vertical polarization or side for horizontal polarizationSuperior Reliability & Performance 154 OBIS LX/LS Heat Sink Life Sciences Guide OBIS LX/LS Heat Sink (part # 1193289) Top and Side Mount Plug Holes Allow for Heat Sink to be mounted in either direction. Need horizontal polarization – mount the Heat Sink with the laser on the side. Optional: Mount Heat Sink on its side for special applications that may require horizontal polarization Connector 2 Pos Vendor: Molex Vendor Part: 51021-0200 Remove Plastic Hole Plugs to Install Screws (provided) to Mount onto Table Top Mount Plug Holes Side Mount Plug Holes Top Mounted Side Mountedcoherent.com 155 Life Sciences Guide OBIS LX/LS Heat Sink Accessories Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all OBIS LX/LS Heat Sinks. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. MECHANICAL SPECIFICATIONS OBIS LX/LS Heat Sink 12 mm (0.47 in.) 50 mm (1.97 in.) 50 mm (1.97 in.)165.2 mm (6.5 in.) 4x M3 6 mm (0.24 in.) 0 mm 3.5 mm (0.14 in.) 8.5 mm (0.33 in.)23.5 mm(0.93 in.)87.5 mm(3.44 in.) 30 mm (1.18 in.) 25.4 mm (1.0 in.) 25 mm (0.98 in.) 20.5 mm (0.8 in.) 100.8 mm (3.97 in.) 3x OBIS Alignment Pins Connector 2 Pos Vendor: Molex Vendor Part: 51021-0200 Fan 0.0 OBIS Datum Point Threads for Accessory Mounting 2x M4 8 2 x 8-32 8.33 mm (0.33 in.) Top View Side View Front ViewRear View NOTE: DO NOT use thermal grease or thermal compounds. The use of thermal grease or thermal compounds will void the laser warranty.Superior Reliability & Performance 156 OBIS LX/LS Laser Box Laser Mount with Cooling, Interface and Power Supply OBIS LX and OBIS LS laser products come with a variety of accessories to support your application needs. The OBIS Laser Box for OBIS LS and OBIS LX offers all the features from the laser in a convenient CDRH-compliant interface with convection cooling for five lasers. As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand- alone all-in-one laser solution. OBIS lasers come with a Power Connec- tion, USB Connection, Fan Connection and a SDR-type Connection for laser control I/O. All of these are on the back panel of every OBIS LX/LS laser. To simplify integration, the OBIS Laser Box connects to the single SDR-type connector for power, signals and communication. The OBIS Laser Box then brings all of these features to the front panel controls and connectors. The OBIS Laser Box offers stability over temperature with conduction cooling for the laser baseplate and cooling fans to maintain the convec tion cooling. FEATURES & BENEFITS • Integrated five bay mount for OBIS lasers • Heat sinks and cooling fans • Modulation inputs for analog and digital for five lasers • USB and RS-232 interface for additional control from host computer • Coherent Connection software for PC • Status indicators for each laser • External power supply • Laser safety features such as key switch and interlock APPLICATIONS • Laboratories needing CDRH features • Applications wanting a simple Analog or Digital inputs to control the laser • Applications wanting thermal management (cooling) for the lasers Accessoriescoherent.com 157 Accessories SPECIFICATIONS1OBIS LX/LS Laser Box OBIS Laser Box Laser Box - five bay 1 Power Supply 2 Part Number 1228877 Included Part Number 1343229 Included Host Computer Remote Control via USB 3 USB 2.0, Mini B Host Computer Remote Control via RS-232 3 RS-232, 115.2K, DB-9F Analog Inputs, 5 each SMB Connector, 0V to 5V, 2000 Ω input impedance Digital Inputs 4 , 5 each SMB Connector, 0V to 3V, 50 Ω input impedance SMB Connector, 0V to 3V, 2000 Ω input impedance Interlock Yes, included with shorting wire Laser Status Indicators Yes, Individual LED for each Laser Warm-up Time (minutes) (from cold start) <2 Coherent Connection Software for PC Included on USB drive with user manual Safety Key switch and interlock UTILITY AND ENVIRONMENTAL REQUIREMENTS Power Consumption (W) (typical) 5 (without lasers) Power Consumption (W) (maximum) 140 (with 5 lasers) Internal Cooling Fan Yes, 3 each Power Input to Laser Box, 6 Pin (VDC) 10 to 14 at 10A maximum, Molex P/N 43025-0600 for mating connector Power Cord (USA) 2.4m (8 ft.) Operating Condition 5 (°C) 10 to 40 for OBIS LX, 10 to 35 for OBIS LS Non-operating Condition 5 (°C) -10 to 60 Shock Tolerance (g) (6 ms) 20 Operating Voltage (VAC) 90 to 264, 47 to 63 Hz Dimensions (L x W x H) Laser Box Power Supply 241 x 184 x 88 mm (9.5 x 7.3 x 3.5 in.) 189 x 89.4 x 47.1 mm (7.4 x 3.5 x 1.9 in.) Weight Laser Box Power Supply 3.9 kg (8.5 lbs.) 0.9 kg (2.0 lbs.) 1 Lasers sold separately. 2 Power supply included. Order item number 1211389 for spare or replacement. 3 Host computer not provided. RS-232 cable not provided. 4 Digital Modulation can be driven up to 5 Volts. 5 Non-condensing. Life Sciences Guide OBIS LX/LS Laser BoxNext >