< PreviousSuperior Reliability & Performance 138 OBIS LX/LS Scientific Remote Life Sciences Guide Accessories SPECIFICATIONS1OBIS LX/LS Scientific Laser Remote Touchscreen Display Size 108 mm (4.3 in.) diagonal Touchscreen Display Resolution, Type 480 x 272 pixel, QVGA, TFT, 24-bit color Touchscreen Display Mode 1 Resistive Touchscreen Audio Yes Internal Power Supply Yes OBIS Lasers that can be connected 1 to 6 lasers with power to optional 1 to 6 heat sink cooling fans Host Computer Remote Control via USB 2 USB 2.0, Mini B Host Computer Remote Control via RS-232 2 RS-232 115.2K, 8N1 Host Computer Remote via Ethernet 2 Ethernet 10/100 (Mb) RJ45 Carry Handle and Stand 9-Position Interlock Yes, included with shorting wire Laser Status Indicators Yes, Individual LED for each laser Analog Modulation Input SMB, 2k W , 0 to 5V Digital Modulation Input 3 SMB, 50 W , 0 to 3V Warm-up Time (minutes) (from cold start) <2 Coherent Connection Software 2 Included on USB drive with user manual UTILITY AND ENVIRONMENTAL REQUIREMENTS Power Consumption (W) (typical) 5 (without lasers) Power Consumption (W) (maximum) 110 (with 6 lasers) Internal Cooling Fan Yes Power Input - Universal IEC-320 Power Cord (USA) 2.4 m (8 ft.) Operating Condition 4 (°C) 0 to 50 Non-operating Condition 4 (°C) -10 to +70 Shock Tolerance (6 ms) 20 g Operating Voltage 90 to 264 VAC, 47 to 63 Hz Dimensions (L x W x H) 180 x 293.5 x 104.4 mm (7.09 x 11.55 x 4.11 in.) Weight 1.75 kg (3.86 lbs.) Weight, Laser-to-Remote Cable (optional) 0.1 kg for 1 meter (0.25 kg for 3 meter) Part Number for OBIS Scientific Remote 1234465 Part Number for OBIS Scientific Remote with 1234466 Six Laser-to-Remote SDR Cables Included1 m each Part Number for OBIS LX/LS SDR-Type Cable from Laser to Remote 1-meter 3-meter 0.3-meter 1179451 1179858 1197523 1 Resistive touchscreen will work with gloves. This is a pressure sensitive touchscreen - not capacitive. 2 Host computer not provided. RS-232 and USB cable not provided. 3 Digital modulation can be driven up to 5V. 4 Non-condensing.coherent.com 139 Life Sciences Guide OBIS LX/LS Scientific Remote Accessories OBIS Scientific Remote Screen ShotSuperior Reliability & Performance 140 Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all OBIS LX/LS Scientific Remotes. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. OBIS LX/LS Scientific Remote Life Sciences Guide Accessories MECHANICAL SPECIFICATIONS OBIS LX/LS Scientific Remote (part # 1234466) 294 mm (11.6 in.) Handle Width 183 mm (7.2 in.) 118 mm (4.6 in.) 259 mm (10.2 in.) Handle Location LOCKABLE IN 9 POSITIONS 30° Typical Front View Rear Viewcoherent.com 141 Accessories OBIS LX/LS Single Laser Remote Full Feature Laser Remote and Power Supply OBIS LX and OBIS LS laser products come with a variety of accessories to support your application needs. The OBIS Single Laser Remote for OBIS LS and OBIS LX offers all the features from the laser in a convenient CDRH-compliant interface. As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand- alone all- in-one laser solution. The OBIS laser comes with a Power Connection, USB Connection, Fan Connection and a SDR-type Connection for laser control I/O. All of these are on the back panel of every OBIS LX/LS laser. To simplify integration the OBIS Single Laser Remote connects to the single SDR-type connector for power, signals, and communication. The OBIS Single Laser Remote then brings all of these features to controls and connectors on the remote’s front and back panel. OBIS Single Laser Remotes can even be stacked together with the provided mounting hardware for applications using multiple OBIS LX/LS lasers. FEATURES & BENEFITS • Compact size • Laser safety features (CDRH) such as key switch and interlock • Laser status indicators • Full input and output connections for control, analog modulation, and digital modulation • Compact power supply for single laser included • Brackets for mounting and stacking included APPLICATIONS • Laboratories that require CDRH features • Applications that require simple analog, digital, or analog and digital combined inputs to control the laser • Applications that require laser control at a remote location away from the laserSuperior Reliability & Performance 142 OBIS LX/LS Single Laser Remote Life Sciences Guide Accessories SPECIFICATIONSOBIS LX/LS Single Laser Remote Host Computer Remote Control via USB 1 USB 2.0, Mini B Host Computer Remote Control via RS-232 1 RS-232, 115.2 K Interlock Yes, included with shorting wire Laser Status Indicators Yes Analog Modulation Input SMB Connector, 0V to 5V, 50 Ω or 2000 Ω input impedance Digital Modulation Input 2 SMB Connector, 0 V to 3 V, 50 Ω input impedance Warm-up Time (minutes) (from cold start) <2 Coherent OBIS Connection Software 3 Included on USB drive with user manual SafetyKey switch and interlock UTILITY AND ENVIRONMENTAL REQUIREMENTS Power Consumption (W) (typical) 1 (laser not included) Power Consumption (W) (maximum) 2 (laser not included) Power Input to Remote, 2 Pin10 to 14 Volts DC at 2A (maximum, 25 W), Molex Contact Pin P/N: 43031-0009 Power Cord (North American) 2.4 m (8 ft.) Operating Condition 4 (°C) 0 to 40 Non-operating Condition 4 (°C)-10 to +70 Shock Tolerance (6 ms) 20 g Power Input to Power Supply90 to 264 VAC, 47 to 63 Hz Dimensions (L x W x H) 105 x 68 x 36 mm (4.1 x 2.7 x 1.4 in.) Weight OBIS Single Laser Remote Power Supply (included) 190 g (6.7 oz) 170 g (6.0 oz) Part Number for OBIS Single Laser Remote1173961 (does not include SDR Laser-to-Remote Cable, order separately below) 1214875 (includes 1 meter SDR Laser-to-Remote Cable, and Power Supply with Power Cord) Part Numbers for Cable, SDR, OBIS LX/LS, and OBIS XT Laser-to-Remote, Male-Male 1-meter 3-meter 0.3-meter 1179451 1179858 1197523 Part Number for OBIS Power Supply, 12VDC1184491 (Power Cord not included) 1 Host computer not provided. USB cable provided. RS-232 cable not provided. 2 Digital modulation can be driven up to 5V. 3 Software operates on Windows 7, 10. 4 Non-condensing.coherent.com 143 Life Sciences Guide OBIS LX/LS Single Laser Remote Accessories 104.9 mm (4.1 in.) 67.5 mm (2.66 in.) 9.2 mm (0.4 in.) 2 Places 16.2 mm (0.64 in.) 13.7 mm (0.5 in.) 2 Places 12 mm (0.5 in.) 2 Places 43.5 mm (1.7 in.) 2 Places 32 mm (1.3 in.) 35.9 mm (1.4 in.) 4X #4-40 Threads 2 Places, Near and Far Side 83.7 mm (3.30 in.) MECHANICAL SPECIFICATIONS OBIS LX/LS Single Laser Remote Top View Front View OBIS LX/LS Single Laser Remote Controls Side View Rear View Key SwitchInterlock Connection Illuminated On/Off Switch Status Indicators Power Input RS-232 USBTo Laser Analog and Digital SMB Connection I/O Connection: Laser Ready, Fault, Base Plate Temp., Power Monitor, Slow Digital Modulation, Laser Diode CurrentSuperior Reliability & Performance 144 OBIS LX/LS Single Laser Remote Life Sciences Guide Accessories OBIS Single Laser Remote Accessories OBIS Single Laser Power Supply, part # 1184491 OBIS Single Laser Remote Power Supply offers 12 Volts DC output to the OBIS Remote and has an universal input of 100-240 Volts AC (47-63 Hz), Power Cord sold separately. Cable, SDR, OBIS LX/LS and OBIS XT Laser-to-Remote, Male-Male OBIS Single Laser Remote requires a SDR-type cable to connect the Laser to the Remote. This cable carries power, signals and communications. Available in 0.3m, 1m and 3m lengths. Sold separately. [Note: OBIS LX/LS and OBIS XT Laser Systems include a SDR cable (1 m). OBIS Single Laser Remote for OBIS LX/LS and OBIS XT part number 1214875 also include a SDR cable (1 m).] 104.4 mm (4.1 in.) Cord Length: 1219.2 mm (48.0 in.) Connector 2-Pin Male Molex P/N SDA43025-0200 2X Contact Pin Molex P/N 43030-0009 IEC-320-C14 Input Receptacle Pin 1 12 VDC Pin 2 Ground 42 mm (1.7 in.) 31 mm (1.2 in.) Front View Top View SDR-type Connectorcoherent.com 145 Life Sciences Guide OBIS LX/LS Single Laser Remote Accessories Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all OBIS LX/LS Single Laser Remotes. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. OBIS Single Laser Remote Accessories Example of the OBIS LX/LS Laser System including: OBIS Single Laser Remote, SDR-type Cable from the Laser to the Remote, USB cable, OBIS Single Laser Power Supply. Cable Length Options: 0.3 m (11.81 in.), 1 m (39.37 in.), and 3 m (118.11 in.) USB Cable Length: 1.8 m (70.86 in.) Power Cord Length: 2.4 m (95.67 in.)Superior Reliability & Performance 146 Accessories OBIS LX/LS 6-Laser Remote Laser Remote and Power Supply for up to Six Lasers The OBIS 6-Laser Remote for OBIS LS and OBIS LX offers power to six lasers in a convenient CDRH-compliant interface. As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand- alone all-in-one laser solution. The OBIS laser comes with a Power Connection, USB Connection, Fan Connection and a SDR-type Connection for laser control I/O. All of these are located on the back panel of the OBIS LX/LS laser. To simplify integration the OBIS 6-Laser Remote connects to the 12VDC Power Input on the back of the OBIS Laser. This allows the OBIS 6-Laser Remote to provide power On/Off to the laser. For applications requiring laser status and control, the USB on the back of each OBIS Laser can be used to communicate with the laser directly. The OBIS 6-Laser Remote is not recommended for applications that require Analog or Digital Modulation. OBIS 6-Laser Remote comes complete with mounting brackets and hardware to mount the remote to a table or stack remotes. FEATURES & BENEFITS • Compact size • Laser safety features (CDRH) such as key switch and interlock • Laser On/Off status indicators • Compact single power supply included • Brackets for mounting and stacking included APPLICATIONS • Laboratories that require CDRH features • Applications that require a simple remote control to turn the lasers On and Off • Applications that do not require Analog or Digital modulationcoherent.com 147 Accessories Life Sciences Guide OBIS LX/LS 6-Laser Remote SPECIFICATIONS1OBIS LX/LS 6-Laser Remote Laser Power CablesSix, 1 meter each, color coded Interlock Yes, included with shorting wire Laser Status Indicators Yes System and Key Switch IndicatorYes Warm-up Time (minutes) (from cold start) <1 Power Consumption (W) Typical Maximum 1 (laser not included) 2 (laser not included) Power Input Universal IEC-320 Power Cord (USA) 2.4 m (8 ft.) Operating Condition 1 (°C)0 to 50°C (32 to 122°F) Non-Operating Condition 1 (°C)-10 to +70°C (14 to 158°F) Shock Tolerance (g) (6 ms) 20 Power Input to Power Supply90 to 264 VAC, 47 to 63 Hz Dimensions (L x W x H) OBIS 6-Laser Remote Power Supply (included) 105 x 68 x 36 mm (4.1 x 2.7 x 1.4 in.) 189 x 89.4 x 47.1 mm ( 7.4 x 3.5 x 1.9 in.) Weight OBIS 6-Laser Remote Power Supply (included) 0.23 kg (0.5 lbs.) 0.9 kg (2.0 lbs.) Part Number OBIS 6-Laser Remote with Power Supply Power Supply, 12VDC 1203909 1211389 1 Non-condensing.Next >