< PreviousSuperior Reliability & Performance 68 Sapphire FP Life Sciences Guide Sapphire SPECIFICATIONSSapphire 458 FP Sapphire 488 FP Wavelength 1 (nm) 458 ±2 488 ±2 Output Power at Fiber Exit 2 (mW)4040, 80, 120, 200 Fiber Type SM-PM 3 Fiber Length (m) 1 Fiber Output FC/APC; 8° angled 4 Spatial ModeTEM 00 , M 2 <1.1 Beam Asymmetry <1:1.1 Noise (%) 20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak <0.25 <1 Long-term Power Stability (%) (2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio >100:1, linear, vertical UTILITY AND ENVIRONMENTAL REQUIREMENTS Laser Safety Classification3b Operating Voltage 5 (VDC) Maximum Rated Nominal +10.8 to 15.0 +12.0 to 13.2 Power Consumption (W) <60 Max. Laser Head Baseplate Temperature 6 50°C (122°F) Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C) Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) -20 to 60°C (-4 to 140°F) Humidity Operating Condition Non-Operating Condition 0 to 95%, non-condensing 0 to 100%, non-condensing Shock Tolerance (11 ms) 15 g laterally, 15 g vertically Dimensions (L x W x H) Laser Head 7 Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 118 x 76 x 30 mm (4.6 x 3.0 x 1.2 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2.0 in.) 171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.) 2 m (6.56 ft.) and options Weights Laser Head 7 Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable) (2.1 lbs.) 0.3 kg (0.66 lbs.) 1 Laser-to-laser tolerance. 2 Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. 3 Single-mode, polarization maintaining fiber, bending radius min. 50 mm. 4 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection. 5 If user-supplied, the DC power supply has to meet the following requirements: power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 6 With factory-provided or other adequate heat sink. 7 Dimensions respectively weight without fiber-pigtail part.coherent.com 69 Life Sciences Guide Sapphire FP Sapphire SPECIFICATIONSSapphire 514 FP Sapphire 532 FP Sapphire 552 FP Wavelength 1 (nm) 514 ±2 532 ±2552 ±2 Output Power at Fiber Exit 2 (mW)40, 80, 12040, 80, 120, 200, 30040, 80, 120 Fiber Type SM-PM 3 Fiber Length (m) 1 Fiber Output FC/APC; 8° angled 4 Spatial ModeTEM 00 , M 2 <1.1 Beam Asymmetry <1:1.1 Noise (%) 20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak <0.25 <1 Long-term Power Stability (%) (2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio >100:1, linear, vertical UTILITY AND ENVIRONMENTAL REQUIREMENTS Laser Safety Classification3b Operating Voltage 5 (VDC) Maximum Rated Nominal +10.8 to 15.0 +12.0 to 13.2 Power Consumption (W) <60 Max. Laser Head Baseplate Temperature 6 50°C (122°F) Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C) Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) -20 to 60°C (-4 to 140°F) Humidity Operating Condition Non-Operating Condition 0 to 95%, non-condensing 0 to 100%, non-condensing Shock Tolerance (11 ms) 15 g laterally, 15 g vertically Dimensions (L x W x H) Laser Head 7 Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 118 x 76 x 30 mm (4.6 x 3.0 x 1.2 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2.0 in.) 171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.) 2 m (6.56 ft.) and options Weights Laser Head 7 Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable) (2.1 lbs.) 0.3 kg (0.66 lbs.) 1 Laser-to-laser tolerance. 2 Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. 3 Single-mode, polarization maintaining fiber, bending radius min. 50 mm. 4 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection. 5 If user-supplied, the DC power supply has to meet the following requirements: power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 6 With factory-provided or other adequate heat sink. 7 Dimensions respectively weight without fiber-pigtail part.Superior Reliability & Performance 70 Sapphire FP Life Sciences Guide Sapphire SPECIFICATIONSSapphire 561 FP Sapphire 588 FP Sapphire 594 FP Wavelength 1 (nm) 561 ±2 588 ±2594 ±2 Output Power at Fiber Exit 2 (mW)40, 80, 120, 2004040 Fiber Type SM-PM 3 Fiber Length (m) 1 Fiber Output FC/APC; 8° angled 4 Spatial ModeTEM 00 , M 2 <1.1 Beam Asymmetry <1:1.1 Noise (%) 20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak <0.25 <1 Long-term Power Stability (%) (2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio >100:1, linear, vertical UTILITY AND ENVIRONMENTAL REQUIREMENTS Laser Safety Classification3b Operating Voltage 5 (VDC) Maximum Rated Nominal +10.8 to 15.0 +12.0 to 13.2 Power Consumption (W) <60 Max. Laser Head Baseplate Temperature 6 50°C (122°F) Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C) Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) -20 to 60°C (-4 to 140°F) Humidity Operating Condition Non-Operating Condition 0 to 95%, non-condensing 0 to 100%, non-condensing Shock Tolerance (11 ms) 15 g laterally, 15 g vertically Dimensions (L x W x H) Laser Head 7 Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 118 x 76 x 30 mm (4.6 x 3.0 x 1.2 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2.0 in.) 171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.) 2 m (6.56 ft.) and options Weights Laser Head 7 Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable) (2.1 lbs.) 0.3 kg (0.66 lbs.) 1 Laser-to-laser tolerance. 2 Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. 3 Single-mode, polarization maintaining fiber, bending radius min. 50 mm. 4 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection. 5 If user-supplied, the DC power supply has to meet the following requirements: power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 6 With factory-provided or other adequate heat sink. 7 Dimensions respectively weight without fiber-pigtail part.coherent.com 71 Life Sciences Guide Sapphire FP Sapphire MECHANICAL SPECIFICATIONS Controller 6.1 mm (0.24 in.) 20.4 mm (0.8 in.) 11 mm (0.43 in.) 16.7 mm (0.66 in.) 0 mm (0.0 in.) 5.1 mm (0.2 in.) 21.1 mm (0.8 in.) 35.3 mm (1.4 in.)62.6 mm (2.5 in.) 102.9 mm (4.0 in.) 112.4 mm (4.4 in.)117.8 mm (4.6 in.) 8.3 mm (0.327 in.) 66 mm (2.6 in.) 76.2 mm (3.0 in.) 8.8 mm (0.345 in.) 6.35 mm (0.25 in.) app. 35 mm (1.38 in.) max. 6.1 mm (0.24 in.) 6 spacers with tapped thread M4, UNC #8 or 5/32 BSW are attached USB-Interface Mini USB-Type B 5 pol Serial Interface DSub-9 (female) Analog Interface 26 pin-headertype AMP latch Tyco 281275-1 Laser Head DSub-25 (female) Fuse TE5 5A 127V Littlefuse 3961500000 DC Power Connector Molex Micro Fit 3.0 10 positions Side View Top ViewSuperior Reliability & Performance 72 Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all Sapphire lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.58 to 0.60 µm 0.79 to 0.82 µm 1.10 to 1.20 µm Max. Power 480 mW 20 mW 50 mW VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER PRODUCT. λ 0.55 to 0.58 µm 0.79 to 0.82 µm 1.10 to 1.20 µm Max. Power 800 mW 20 mW 50 mW VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.54 to 0.57 µ m 0.79 to 0.82 µ m 1.08 to 1.14 µ m Max. Power 480 mW 20 mW 50 mW VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.50 to 0.55 µm 0.79 to 0.82 µm 1.00 to 1.10 µm Max. Power 480 mW 20 mW 50 mW VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.45 to 0.50 µ m 0.79 to 0.82 µ m 0.90 to 1.00 µ m Max. Power 480 mW 20 mW 50 mW VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER PRODUCT. λ 0.50 to 0.55 µ m 0.79 to 0.82 µ m 1.00 to 1.10 µ m Max. Power 1300 mW 20 mW 200 mW Sapphire FP Life Sciences Guide Sapphire MECHANICAL SPECIFICATIONS Sapphire FP 6 mm (0.24 in.) 7.5 mm (0.3 in.) 125 mm (4.92 in.) 115 mm (4.53 in.) 40.5 mm (1.59 in.) 5 mm (0.2 in.) 17.9 mm (0.7 in.) 34 mm (1.34 in.) 19 mm (0.75 in.) 70 mm (2.76 in.)55 mm (2.17 in.) Ø6.2 mm (0.24 in.) Front View Side View Top Viewcoherent.com 73 Sapphire Sapphire SF NX CW Free Space and Fiber Pigtailed Single-Frequency Lasers Sapphire SF NX is a series of compact CW visible single-frequency lasers based on Coherent’s unique OPSL (Optically Pumped Semicon- ductor Laser) technology. Sapphire SF NX lasers come with an ultra- narrow linewidth of <1.5 MHz, a high quality diffraction-limited beam with excellent pointing stability, high power stability and low noise. Sapphire lasers are manufactured in cleanrooms using Coherent’s patented PermAlign™ technology for optimal aligning and solder- bonding the optics. Sapphire SF NX lasers come with a flexible inter- face concept: Analog, RS-232 or USB – it is up the user to select the appropriate communication channel. Sapphire SF NX lasers are intended for applications that need narrow and ultra-narrow linewidth light such as Raman spectroscopy, inter- ferometry, holography, metrology, and inspection. FEATURES & BENEFITS • Ultra-narrow linewidth • Outstanding power and wavelength stability • Output power - Up to 150 mW at 488 nm / 100 mW fiber pigtailed - Up to 200 mW at 532 nm / 150 mW fiber pigtailed • Ultra-low noise • Superior beam quality • PermAlign technology - Permanent optimal alignment - Unsurpassed robust and stable • OEM and end-user versions • Proven Sapphire reliability APPLICATIONS • Raman Spectroscopy • Interferometry • Holography • Metrology • InspectionSuperior Reliability & Performance 74 Sapphire SF NX Life Sciences Guide Sapphire SPECIFICATIONSSapphire 488 SF NX Sapphire 532 SF NX Wavelength 1 (nm) 488.0 532.0 Wavelength Accuracy 2 (nm)±0.1 Single-longitudinal Mode, Linewidth (MHz)<1.5 Output Power 3 (mW)20, 50, 75, 100, 150 20, 50, 75, 100, 150, 200 Spatial Mode TEM 00 , M 2 <1.1 Beam Asymmetry 0.9 to 1.1 Beam Diameter at 1/e2 (mm) 0.70 ±0.05 Beam Divergence (mrad) <1.3 Pointing Stability (μrad) (over 2 hours after warm-up and ±3°C) <30 Noise (%) 20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak <0.25 <1 Long-term Power Stability (%) (2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio >100:1, vertical Static Alignment Tolerances 4 Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25 ±2.5 ±200 5 UTILITY AND ENVIRONMENTAL REQUIREMENTS InterfacingAnalog, RS-232, USB Operating Voltage 6 (VDC) Maximum Rated Nominal +10.8 to 15.0 +12.0 to 13.2 Power Consumption (W) <60 Max. Laser Head Baseplate Temperature 7 +50°C (122°F) Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C) Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing -30 to 60°C (-22 to 140°F) Shock Tolerance (6 ms) 7 g laterally, 15 g vertically Dimensions (L x W x H) Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 123.3 x 76.2 x 38.1 mm (4.9 x 3.0 x 1.5 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2 in.) 171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.) 1.52 m (5.0 ft.) Weights Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable) (2.1 lbs.) 1.7 kg (3.7 lbs.) 0.3 kg (0.66 lbs.) 1 Measured in air. 2 Laser-to-laser tolerance and wavelength tolerance over guaranteed lifetime. 3 Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. 4 Static alignment tolerances are relative to the right bottom edge (in beam direction). 5 200 mm is ~25% of Rayleigh Range at 488 nm and ~30% of Rayleigh Range at 532 nm. 6 If user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 7 With factory-provided or other adequate heat sink.coherent.com 75 Life Sciences Guide Sapphire SF NX Sapphire SPECIFICATIONSSapphire 488 SF FP NX Sapphire 532 SF FP NX Wavelength 1 (nm) 488.0532.0 Wavelength Accuracy 2 (nm)±0.1 Single-longitudinal Mode, Linewidth (MHz)<1.5 Output Power at Fiber Exit 3 (mW)20, 50, 10020, 50, 100, 150 Fiber Type SM-PM 4 Fiber Length (m) 1 Fiber Numerical Aperture (NA) (1/e2)0.06 Fiber Output FC/APC; 8° angled 5 Spatial ModeTEM 00 , M 2 <1.1 Beam Asymmetry <1:1.1 Noise (%) 20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak <0.25 <1 Long-term Power Stability (%) (2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio >100:1, linear, vertical UTILITY AND ENVIRONMENTAL REQUIREMENTS InterfacingAnalog, RS-232, USB Operating Voltage 6 (VDC) Maximum Rated Nominal +10.8 to 15.0 +12.0 to 13.2 Power Consumption (W) <60 Max. Laser Head Baseplate Temperature 7 +50°C (122°F) Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C) Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing -30 to 60°C (-22 to 140°F) Shock Tolerance (6 ms) 7 g laterally, 15 g vertically Dimensions (L x W x H) Laser Head 8 Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 123.3 x 76.2 x 38.1 mm (4.9 x 3.0 x 1.5 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2 in.) 171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.) 1.52 m (5.0 ft.) Weights Laser Head 8 Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable) (2.1 lbs.) 1.7 kg (3.7 lbs.) 0.3 kg (0.66 lbs.) 1 Measured in air. 2 Laser-to-laser tolerance and wavelength tolerance over guaranteed lifetime. 3 Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. 4 Single-mode, polarization maintaining fiber, bending radius min. 50 mm. 5 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection. 6 If user-supplied, the DC power supply has to meet the following requirements: power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 7 With factory-provided or other adequate heat sink. 8 Dimensions respectively weight without fiber pigtail part.Superior Reliability & Performance 76 Sapphire SF NX Life Sciences Guide Sapphire MECHANICAL SPECIFICATIONS Sapphire SF NX 15 mm (0.6 in.) 17.9 mm (0.7 in.) 17.5 mm (0.69 in.) 5 mm (0.2 in.) 10 mm (0.4 in.) 110 mm (4.3 in.) 115.6 mm (4.5 in.) 120 mm (4.7 in.) 125 mm (4.9 in.) 7.5 mm (0.3 in.) 19 mm (0.75 in.) 34 mm (1.3 in.) Beam Exit 6 mm (0.24 in.) 70 mm (2.75 in.) 55 mm (2.2 in.) 45 mm (1.8 in.) Position of Dowel Pins (Beam Registering) LED (Emission Indicator) Connection to Controller (44pin SUB-D male) DC Supply for Fan (AMP-MODU-2pin-male) Interfacing Part (Heatsink) should have flatness <0.05 mm (0.002 in.) Beam Waist at Exit Window [3 mm (0.12 in.) inside from here] [±200 mm (7.9 in.)] 4 Holes Ø4.0 mm (0.16 in.) for Screws M3, UNC/UNF No.5&6, 1/8-40 BSW/BSF or BA No.4&5 Side View Top View Rear View Front View Sapphire SF FP NX 6 mm (0.24 in.) 7.5 mm (0.3 in.) 125 mm (4.92 in.) 115 mm (4.53 in.) 40.5 mm (1.59 in.) 5 mm (0.2 in.) 17.9 mm (0.7 in.) 34 mm (1.34 in.) 19 mm (0.75 in.) 70 mm (2.76 in.)55 mm (2.17 in.) Ø6.2 mm (0.24 in.) Front View Side View Top Viewcoherent.com 77 Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all Sapphire lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.45 to 0.50 µ m 0.79 to 0.82 µ m 0.90 to 1.00 µ m Max. Power 480 mW 20 mW 50 mW VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.50 to 0.55 µm 0.79 to 0.82 µm 1.00 to 1.10 µm Max. Power 480 mW 20 mW 50 mW Life Sciences Guide Sapphire SF NX Sapphire 6.4 mm (0.25 in.)0.0 mm (0.00 in.) 102.4 mm (4.03 in.) 116.3 mm (4.58 in.) 123.3 mm (4.85 in.) 4.6 mm (0.18 in.) 76.2 mm (3.0 in.) 71.1 mm (2.80 in.) 97.8 mm (3.85 in.) 27.2 mm (1.07 in.) 5.1 mm (0.20 in.) 0.0 mm (0.00 in.) 38.1 mm (1.50 in.) 66.0 mm (2.60 in.) 14.9 mm (0.59 in.) 38.1 mm (1.5 in.) 33.3 mm (1.31 in.) 4 Spacers with Tapped Thread M3 3.5 mm (0.14 in.) DC Power Connector Molex Micro Fit 3.0 10 Positions Analog Interface 26 Pin IDC Connector Male Laser Head D-Sub 44 Female Serial Interface D-Sub 9 Female USB Interface Mini USB Type B 5 Pole MECHANICAL SPECIFICATIONS Sapphire SF (FP) NX Controller Bottom View Top ViewNext >