< PreviousSuperior Reliability & Performance 78 OBIS Galaxy 8-Laser Beam Combiner OBIS Galaxy is offering plug-and-play capabilities in laser combining. The OBIS Galaxy is equipped with 8 FC fiber inputs, and can accept any Galaxy compatible laser using a plug-and-play integration. Each input is optimized to accept the fiber with a FC connection, and Coherent’s patented beam combining technology integrates all 8 inputs. The OBIS Galaxy provides a fiber output of the combined 8 lasers in a single-mode polarization-maintaining fiber, 2 meters in length, with a FC connector for any application. The OBIS Galaxy matches Coherent’s rigorous standards and advanced stress-testing benchmarks, offering the ease of integration, robustness, superior performance, and reliability. FEATURES & BENEFITS • Plug-and-play 8-input, single- output beam combiner • Compact and low profile • High transmission beam combiner with typical 60% throughput per channel • Fiber FC/APC output connector; FC/PC8 output connector available as an option APPLICATIONS • Optogenetics • Endoscopy Spinning Disk and TIRF Microscopy OBIS Galaxycoherent.com 79 Life Sciences Guide OBIS Galaxy SPECIFICATIONS 1 OBIS Galaxy Laser Combiner 8 Input Fiber Connections 2 (nm) 405 445 or 458 488 or 473 514 532 552 or 561 588 or 594 640 Power Throughput 3 (%) (when used with Coherent OBIS Galaxy Compatible Lasers) for 405 nm to 594 nm for 640 nm >45, Typical >60 >55, Typical >70 Maximum Power Per Channel (mW)120 Maximum Total Output Power (mW)<500 RMS Noise (%) (20 Hz to 2 MHz)<0.5 Peak-to-Peak Noise (%) (20 Hz to 20 kHz)<2 Fiber Connector Type (Input Connectors)FC form-factor, ultra-flat contact FC/UFC with extended-life interface, anti-reflection (AR) coated tip Polarization Extinction Ratio Loss (%)<50 Long-term Power Throughput (%) (8 hours, ±3°C)>95 Long-term Power Throughput (%) (average)≤2 over 1000 hours OUTPUT FIBER Fiber Connector Type 4 (distal end) FC/APC Optional FC/PC8 8° angled, with extended-life interface 8° angled, with extended-life interface Fiber Cable Type3 mm mono-coil Fiber Cable Length (m) (minimum)2 Fiber Numerical Aperture (NA) (1/e 2 ) FC/APC Optional FC/PC8 0.055 0.065 Mode Field Diameter (μm) (typical)3 Spatial ModeTEM 00 M 2 (Beam Quality) 5 ≤1.1 Fiber Minimum Bend Radius51 mm (2.0 in.) Fiber Tensile Load (maximum)1 kg (2.2 lbs.) Fiber Connector Type (internal to OBIS Galaxy)FC form-factor, ultra-flat contact FC/UFC with extended-life interface UTILITY AND ENVIRONMENTAL REQUIREMENTS Dimensions229 x 170 x 29 mm (9.0 x 6.7 x 1.1 in.) Weight1.4 kg (3 lbs.) Shock Tolerance 6 (g) (11 ms)30 Vibration 6 (g-RMS) (20 Hz to 2 kHz)7.7 Ambient Temperature Operating Temperature Storage Temperature 10 to 50°C (50 to 122°F) 7 -20 to 60°C (-4 to 140°F) Laser Safety Classification 8 Not Applicable 1 System specifications measured at 25°C. 2 All input channels require a ±1 nm center wavelength tolerance. Required wavelength tolerances specifically: 405 nm with 404 nm to 406 nm, 445 nm with 444 nm to 446 nm, 458 nm with 457 nm to 459 nm, 488 nm with 487 nm to 489 nm, 514 nm with 513 nm to 515 nm, 532 nm with 531 nm to 533 nm, 552 nm with 551.5 nm to 553.5 nm, 561 nm with 560.5 nm to 562.5 nm, 588 nm with 587 nm to 589 nm, 594 nm with 593 nm to 595 nm, 640 nm with 641 nm to 643 nm. 3 The OBIS Galaxy Beam Combiner as tested and certified will be >60% power transmission per wavelength as measured with production tooling fixtures. 4 Fiber connector output not compatible for patchcord-to-patchcord connection. 5 M 2 measured with ModeMaster with 90/10 Clip Levels. 6 Non-Operational with a before/after change of <10%. 7 OBIS LS laser with Operating Temperature of 15 to 40°C (59 to 104°F). 8 OBIS Galaxy is not a laser and therefore the Laser Safety Classification is determined by the end-user and application. Refer to CDRH 21 CFR 1040 subchapter J or IEC 60825-1. OBIS GalaxySuperior Reliability & Performance 80 OBIS Galaxy Life Sciences Guide MECHANICAL SPECIFICATIONS OBIS Galaxy 225 mm (8.9 in.) 222.7 mm (8.8 in.) 50 mm (2.0 in.) 169.6 mm (6.7 in.)25.4 mm (1.0 in.) 228.6 mm (9.0 in.) 29.1 mm (1.1 in.) Top View Side View Optional FC/PC8 Angled Flat Connector Distal End – Output FC/UFC Launch End - Input MECHANICAL SPECIFICATIONS FC/APC Distal End - Output FC Connector Key Polarization ±2° Max. Laser Aperture Polish Direction Not Applicable to FC/UFC Connector View of Fiber from Connector End 3 mm PVC Coated Monocoil Tubing FC Connector Key Type R - Narrow Key (2.0 mm +0.02/-0.03 mm Key Width) FC Connector Key Polarization ±2° Max. Laser Aperture Polish Direction View of Fiber from Connector End 3 mm PVC Coated Monocoil Tubing FC Connector Key Type R - Narrow Key (2.0 mm +0.02/-0.03 mm Key Width) 8.0° FC Connector Key Polarization ±2° Max. Laser Aperture Polish Direction View of Fiber from Connector End 3 mm PVC Coated Monocoil Tubing FC Connector Key Type R - Narrow Key (2.0 mm +0.02/-0.03 mm Key Width) 8.0° OBIS Galaxycoherent.com 81 Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all OBIS Galaxy beam combiners. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. 350 nm to 1100 nm <500 mW VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER PRODUCT. 400 nm to 700 nm <10W Life Sciences Guide OBIS Galaxy OBIS FP LX Lasers 1 for OBIS GalaxyPart Number OBIS 405 nm LX 50 mW Laser: Fiber Pigtail: UFC, Galaxy, 404 nm to 406 nm1236438 OBIS 405 nm LX 100 mW Laser: Fiber Pigtail: UFC, Galaxy, 404 nm to 406 nm1236439 OBIS 445 nm LX 45 mW Laser: Fiber Pigtail: UFC, Galaxy, 444 nm to 446 nm1236441 OBIS 458 nm LX 45 mW Laser: Fiber Pigtail: UFC, Galaxy, 457 nm to 459 nm1236442 OBIS 473 nm LX 50 mW Laser: Fiber Pigtail: UFC, Galaxy, 472 nm to 474 nm1399476 OBIS 488 nm LX 30 mW Laser: Fiber Pigtail: UFC, Galaxy, 487 nm to 489 nm1236443 OBIS 488 nm LX 100 mW Laser: Fiber Pigtail: UFC, Galaxy, 487 nm to 489 nm1236444 OBIS 514 nm LX 50 mW Laser: Fiber Pigtail: UFC, Galaxy, 513 nm to 515 nm1311150 OBIS 640 nm LX 75 mW Laser: Fiber Pigtail: UFC, Galaxy, 641 nm to 643 nm1236445 OBIS FP LS Lasers 1 for OBIS GalaxyPart Number OBIS 532 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy, 531 nm to 533 nm 1276599 OBIS 552 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy, 551.5 nm to 553.5 nm 1275619 OBIS 561 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy, 560.5 nm to 562.5 nm 1275608 OBIS 594 nm LS 60 mW Laser: Fiber Pigtailed: UFC, Galaxy, 592 nm to 594 nm1363485 Sapphire FP Lasers 1 for OBIS GalaxyPart Number Sapphire 514-FP UFC OEM Laser System, 120 mW, Galaxy, 513 nm to 515 nm1276125 Sapphire 532-FP UFC OEM Laser System, 120 mW, Galaxy, 531 nm to 533 nm1276167 Sapphire 552-FP UFC OEM Laser System, 120 mW, Galaxy, 551.5 nm to 553.5 nm1276186 Sapphire 561-FP UFC OEM Laser System, 120 mW, Galaxy, 560.5 nm to 562.5 nm1276187 Sapphire 588-FP UFC OEM Laser System, 40 mW, Galaxy, 587 nm to 589 nm1276188 1 All lasers same as standard product except FC connector changed to UFC type. OBIS Galaxy Laser CombinerPart Number 8 Input FC/UFC, Single Output FC/APC, 405 nm, 445 nm, 488 nm, 514 nm, 532 nm, 552 nm, 588 nm, 640 nm 8 Input FC/UFC, Single Output FC/APC, 405 nm, 458 nm, 488 nm, 514 nm, 532 nm, 552 nm, 588 nm, 640 nm 8 Input FC/UFC, Single Output FC/APC, 405 nm, 445 nm, 488 nm, 514 nm, 532 nm, 561 nm, 588 nm, 640 nm 8 Input FC/UFC, Single Output FC/APC, 405 nm, 458 nm, 488 nm, 514 nm, 532 nm, 561 nm, 588 nm, 640 nm 8 input FC/UFC, Single Output FC/PC8, 405 nm, 445 nm, 488 nm, 514 nm, 532 nm, 561 nm, 588 nm, 640 nm 8 input FC/UFC, Single Output FC/APC, 405 nm, 445 nm, 488 nm, 514 nm, 532 nm, 561 nm, 594 nm, 640 nm 8 input FC/UFC, Single Output FC/APC, 405 nm, 445 nm, 473 nm, 514 nm, 532 nm, 561 nm, 594 nm, 640 nm 1253553 1253554 1253555 1253556 1343303 1363484 1399474 NOTE: OBIS Laser includes: laser and mounting hardware. The following needs to be ordered separately: OBIS LaserBox (part numbers 1228877 or 1343229), OBIS Remote (part number 1214875), and OBIS Heat Sink (part number 1193289). See individual OBIS accessory data sheets for details. NOTE: Sapphire Lasers include: Laser, OEM USB Controller, 2 meter head cable and connector kit. The following needs to be ordered separately: Sapphire laser power supply (part number 1105375), Sapphire laser heat sink and mounting hardware (part number 1110061) OBIS GalaxySuperior Reliability & Performance 82 OBIS CellX OBIS CellX The Universal Light Engine OBIS CellX is a multi-wavelength platform for use as the laser excitation “Light Engine” in applications requiring up to 4 lasers from a single module. CellX delivers up to four wavelengths from a single, compact module that includes user-adjustable steering and telescopes used to optimize the beams to your target requirements. For example, CellX can be aligned to give flexible patterns of focused stripes in a flow cytometer. Using the same optical Cores that are at the heart of Coherent’s OBIS suite of lasers, CellX delivers best-in-class optical performance and reliability. By consolidating control, thermal management and packaging, CellX reduces complexity encountered when integrating multiple separate lasers. The savings that come from deleting redun- dant elements is reinvested into features to benefit your application. CellX has a single electrical interface for ease of installation. Each laser wavelength can be individually controlled via RS-232 or USB computer interface, or via analog and digital control lines. With its low cost, alignment flexibility and ease-of-integration, CellX is the universal laser Light Engine for your application. FEATURES & BENEFITS • Up to 4 wavelengths • OBIS Performance • Common power, control and I/O interfaces • User-adjustable beam steering and telescopes APPLICATIONS • Flow Cytometry • Microscopy • Medical Imaging • Optogeneticscoherent.com 83 Life Sciences Guide OBIS CellX OBIS CellX OPTICAL SPECIFICATIONSOBIS CellX 405 OBIS CellX 488 OBIS CellX 561 OBIS CellX 637 Wavelength 1 (nm) 405 488561637 Output Power 2 (mW) Part Number 1426532 1426531 1426530 1426529 1318680 1318682 1318681 1318683 – – – 50 50 50 100 100 50 50 50 50 50 50 100 100 – – 50 – n/a 50 n/a 100 – 50 – – 50 50 100 100 Spatial Mode TEM 00 M2 (Beam Quality) 3 ≤1.3 Beam Asymmetry≤1:1.2 Beam Diameter at 1/e 2 (mm)2.63.03.54.5 Beam Divergence (mrad, full angle)0.2 Pointing Stability Over Temperature (µrad/°C)<10 Beam Colinearity 4 (µrad)<100 RMS Noise 5 (%) (20 Hz to 20 MHz)<0.25 Peak-to-Peak Noise 5 (%) (20 Hz to 20 kHz)<1 Long-term Power Stability (%) (8 hours, ±3°C) <2 Warm-up Time 6 (minutes) (from cold start)<5 Polarization Extinction Ratio>50:1>75:1>50:1>50:1 Polarization AzimuthVertical ±5° CONTROL SPECIFICATIONS Interface for Computer ControlUSB (mini-B) and RS-232 (from DB37, 115200 Baud) Laser Drive Modes (Four Operating Modes, individually selected for each wavelength thru USB or RS-232) 1) CW with Power Control via USB/RS-232 2) Analog Modulation 3) Digital Modulation 4) Mixed Analog and Digital Modulation (simultaneous Analog and Digital) Digital Modulation Connection on DB37 Interface Voltage and Impedance Maximum Bandwidth (kHz) Rise Time (10% to 90%) (µsec) Fall Time (90% to 10%) (µsec) Modulation Depth (extinction ratio) Power Range 0-3.3V 7 , 2 kOhm input impedance each, Normally Low (off) 50 <5 <5 Infinite Modulate from 0% to Set Power (USB or RS-232) in Digital Mode Analog Modulation Connection on DB37 Interface Voltage and Impedance Maximum Bandwidth, 3dB (kHz) Rise Time (10% to 90%) (µsec) Fall Time (90% to 10%) (µsec) Modulation Depth (extinction ratio) Power Range 0 to 5V, 2 kOhm input impedance each, Normally Low (off) 50 <5 <5 >50:1, Typical 100:1 Modulate from 0% to 110% with 0 to 5V in Analog Mode 1 Laser-to-laser center wavelength tolerance: 405 nm ±5 nm. 488 nm and 561 nm with ±2 nm, 640 nm with 632 to 643 nm range. Short pass filter suppression of out-of-band emission for 640 nm. 2 Output power is measured at the output window of CellX. Power is variable in CW Mode from 1% (405 nm and 640 nm) to 110% of rated power. Output power is variable in CW Mode from 10% (488 nm and 561 nm) to 110% of rated power. Specifcations are valid for 100% power. For 488 nm and 561 nm any residual laser emission at 808 nm fundamental is <0.1 mW. 3 Beam Quality (M2) measured per laser channel using ModeMaster with 90/10 clip levels. 4 Standard alignment. User adjustable. 5 RMS Noise and Peak-to-Peak Noise Specifications are per laser channel, during CW operation. 6 Typical power-on delay of 1 minute from cold start. 7 Digital input is 5V tolerant. Pin 21 Pin 4 Pin 24 Pin 7 Pin 3 Pin 23 Pin 6 Pin 26Superior Reliability & Performance 84 OBIS CellX Life Sciences Guide OBIS CellX MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS OBIS CellX Dimensions 1 (mm) (L x D x H)155 x 180 x 52.2 Beam Position from Reference 1 (mm)<0.5 Beam Angle (mrad)<5 Laser Safety Classification 2 4 ESD ProtectionEN61326-1 (8 kV Air Discharge, 4 kV Contact Discharge) Baseplate Operating Temperature (°C)10 to 45 Heat Dissipation of Laser Head 3 (Watts)Typical 20, Maximum 60 Ambient Temperature 4 (°C)10 to 45 Non-Operating Condition (°C)-20 to +60 Shock Tolerance (6 ms) 30g Weight (kg)2.2 ELECTRICAL SPECIFICATIONS Power Input Connector Use Molex 0430250600 for Power Cable Connector, Pins 1,2,3 for Power, Pins 4,5,6 for Ground Supply Voltage (V DC)12 ± 2 (100 Watt minimum) Power Consumption (W)Typical 20, Maximum 60 MECHANICAL SPECIFICATIONS OBIS CellX 1 See mechanical drawing. 2 OEM Product - does not comply with CDRH 21CFR 1040.10 and 1040.11 without appropriate integration. 3 Typically 85% of heat load through the base plate. See User Manual for more detail. 4 Non-Condensing. See User Manual for more detail. 180.0 mm (7.09 in.) 160.0 mm (6.30 in.) 184.7 mm (7.27 in.) 155.0 mm (6.10 in.) Ø 35.6 mm (1.40 in.) 4X 4-40 UNC 4.8 mm (0.19 in.) Tapped Holes for Optional Objective or Accessory Mounting Power Receptical Laser Control I/O DB37 Status Indicator 2X screws to remove lid to access beam adjustments USB Interlock Indicator Laser Aperture Ø 10.2 mm (0.40 in.) 44.8 mm (1.77 in.) 52.2 mm (2.06 in.) 25.4 mm (1.00 in.) 31.8 mm (1.25 in.) 147.0 mm (5.79 in.) 4.0 mm (0.16 in.) 10.0 mm (0.39 in.) 4X Ø 4.8 mm (0.19 in.) Thru All Mounting Holes for M4 or #8 Socket Head Cap Screws Rear View Top View Front Viewcoherent.com 85 Life Sciences Guide OBIS CellX OBIS CellX OPTICAL PERFORMANCE SPECIFICATIONS OBIS CellX Objective Lens Accessories OL10-UVOL15-UV Part Number13659351383130 Wavelength Range (nm)345 to 700 Beam Profile at Focus (Vertical, Horizontal)Gaussian, Gaussian Focus Spot Size Vertical (µm) (1/e 2 )10 ±215 ±3 Focus Spot Size Horizontal 1 (µm) (1/e2)60 ±1590 ±20 Working Distance 2 (mm)36.460.9 Dimensions (mm)22 x 22 x 47.222 x 22 x 59.7 Vertical Adjustment 3,4 (µm)±250 Horizontal Adjustment 3,4 (µm)±250 Focus Adjustment 5 Independent focus adjustment of all wavelengths NOMINAL OPTICAL PERFORMANCE OBIS CellX ACCESSORIES 1 Measured at location of best vertical focus. System aligned to lower limit on delivery. Horizontal beam size can be adjusted up to the upper limit. System may be adjusted to reduce or expand the horizontal focus width. See User Manual. 2 Measured from mechanical surface (output end) of the objective assembly - see drawing. 3 Measured from nominal beam axis. Adjustment using tilt/yaw adjustment internal to CellX, while meeting all optical specifications. 4 Assumes the objective assembly mounted within less than 200 mm (optical path length) from the output face of CellX. 5 Adjustment using telescope adjustment internal to CellX, while meeting all optical specifications. Nominal optical performance through focus OL10-UV Flow cytometry example: four laser focus with separated positions - user adjustable Nominal optical performance through focus OL15-UV Beam Diameter (µm) 0 10 20 30 40 50 60 70 80 90 100 -1.0 Working Distance (mm) -0.50.00.51.0 405 488 355 561 637 Beam Diameter (µm) 0 10 20 30 40 50 60 70 80 90 100 -1.0 Working Distance (mm) -0.50.00.51.0 405 488 355 561 637 Superior Reliability & Performance 86 Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all OBIS CellX lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. OBIS CellX Life Sciences Guide OBIS CellX PART NUMBER Laser 1426532CellX Laser 1x50 mW 488 nm 1426531CellX Laser 2x50 mW 488, 637 nm 1426530CellX Laser 2x50 mW 488, 561 nm 1426529CellX Laser 2x50 mW 405, 488 nm 1318680CellX Laser 3x50 mW 405, 488, 637 nm 1318682CellX Laser 4x50 mW 405, 488, 561, 637 nm 1318681CellX Laser 3x100 mW 405, 488, 637 nm 1318683CellX Laser 4x100 mW 405, 488, 561, 637 nm PART NUMBER Accessory 1323532CellX System 4x100 mW 405, 488, 561, 637 nm Developers Kit, includes CellX and all parts below 1321203Accessory Kit for CellX (Alignment Tools, Interlock Plug, USB Cable, Coherent Connection, User Manual) 1365935Accessory, Objective Lens, OL10-UV 10 µm Focus, CellX 1383130Accessory, Objective Lens, OL15-UV 15 µm Focus, CellX 1321963Accessory, Mount, Front Aperture Objective Holder, CellX 1321964Accessory, Translation Stage with Mount for Objective Lens, CellX 1323285Heatsink, Fan-Cooled with Stage Platform Extension, CellX 1315322Heatsink, OEM, CellX 1299911Accessory, Control Board, Adjustable Power, CellX 1298365Accessory, Control Board, Key-Switch, RS-232, Digital/Analog SMB, CellX 1313160Accessory, Interlock Plug, DB37, CellX 1323597Accessory, Control Board, 4 Analog Modulation Inputs, RS-232 1211389Power Supply, OBIS for 6L Remote, CellX, Laser Boxcoherent.com 87 Genesis MX MTM-Series Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems Applications like Ophthalmology, Microscopy and Photocoagulation are enable by low noise, visible and infrared true CW lasers. The Genesis MX MTM-Series provides up to 8W of visible laser light or 10 W of infrared laser light from either OEM or CDRH-compliant end-user systems. Based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology, the Genesis MX MTM-Series features variable output power without changing the beam parameters. This, combined with low noise and high stability, provides unparalleled laser performance in a convenient package. Genesis MX MTM-Series is the perfect match for customers in need of the highest performing CW laser technology for research and instrumen- tation in medical and therapeutic applications. FEATURES & BENEFITS • Multitransverse mode • OEM or end-user versions • Air- or water-cooled solutions APPLICATIONS • Ophthalmology • Microscopy • Photocoagulation Genesis MXNext >