< PreviousSuperior Reliability & Performance 128 Genesis CX Genesis CX SLM-Series High Power Single Longitudinal Mode (SLM) UV and Visible OPS Laser Systems Based on Coherent’s Optically Pumped Semiconductor Laser (OPSL) technology, the Genesis CX SLM laser is a high-performance CW laser producing a single longitudinal mode (SLM) laser beam at up to 5 W in the visible wavelength range (460 to 590 nm) and up to 100 mW in the UV (355 nm). Standard wavelengths and powers include: - 355 nm, at up to 100 mW - 460, 480, 488, 514, 532, 577, and 590 nm, at up to 5 W OPSL technology furthermore offers the unique ability to tailor the wavelength of the laser to meet your unique applications requirement, dependent only by the semiconductor material system being used. Current capabilities include 310 to 390 nm, 460 to 590 nm, and 920 to 1180 nm, with new wavelengths under development. FEATURES & BENEFITS • Up to 5 W output power at visible wavelengths • Up to 100 mW output power at UV wavelengths • Standard wavelengths at 355, 460, 480, 488, 514, 532, 577, and 590 nm • Single longitudinal mode (<5 MHz linewidth) • Superior mode quality • Power-invariant beam properties • Low noise • PermAlign™ solder-bonded optics technology • AAA™ ultra-long life pump diodes • OEM and end-user configuration options APPLICATIONS • Holography • Spectroscopy • Interferometry coherent.com 129 Life Sciences Guide Genesis CX SLM-Series Genesis CX SPECIFICATIONS 1 Genesis CX-355 2 Wavelength (nm) 355 ±2 FWHM Linewidth (MHz) <5 Pulse Format CW Spectral Purity (%) >99 Output Power (mW) 40, 60, 80, 100 Spatial Mode TEM 00 Beam Quality (M2) <1.2 Beam Circularity 3 1.0 ±0.1 Beam Waist Diameter (mm) (FW, 1/e 2 )0.975 ±0.2 Beam Divergence (mrad) (FW, 1/e 2 ) <1.2 Beam Waist Location 4 (m) ±0.325 Beam Position Stability 5 (μm/°C)<5 Beam Pointing Stability 5 (μrad/°C) <6 Beam Position Tolerance 6 (mm) Horizontal Vertical ±<1.0 ±<1.0 Beam Pointing Tolerance (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Vertical 9 , ±5° Noise (%, rms) (10 Hz to 1 MHz) <0.1 Power Stability 7 (%) (pk-pk) ±<1 Warm-up Time (minutes) <30 CDRH Compliant Yes UTILITY REQUIREMENTS Operating Voltage (VAC)100 to 240 Frequency (Hz)50 to 60 Power Consumption (W)500 Cooling RequirementsHeat sink required Genesis CX Water-Cooled Riser and Chiller, or equivalent ENVIRONMENTAL CONDITIONS Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing -10 to 60°C (14 to 140°F) Relative Humidity 8 (%) 5 to 95 1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. 2 Available in OEM or end user versions. 3 Circularity defined as vertical diameter divided by horizontal diameter. 4 Negative value corresponds to a location inside head. 5 After warm-up over 2 hours. 6 Measured at the output window. Positions are relative to the base and side of the laser as shown in the drawing. 7 Measured over 8 hours. 8 Non-condensing. 9 Vertical + normal to laser base plane.Superior Reliability & Performance 130 Genesis CX SLM-Series Life Sciences Guide Genesis CX SPECIFICATIONS 1 Genesis CX-460 2 Genesis CX-480 2 Genesis CX-488 2 Wavelength (nm) 460 ±3 480 ±3488 ±3 FWHM Linewidth (MHz) <5 Pulse Format CW Spectral Purity (%) >99 Output Power (mW) 100020002000 Spatial Mode TEM 00 Beam Quality (M2) <1.1 Beam Circularity 3 1.0 ±0.1 Beam Waist Diameter (mm) (FW, 1/e 2 )2.1 ±0.32.1 ±0.32.2 ±0.3 Beam Divergence (mrad) (FW, 1/e 2 ) <0.5 Beam Waist Location 4 (m) ±0.5 Beam Position Stability 5 (μm/°C)<5 Beam Pointing Stability 5 (μrad/°C) <5 Beam Position Tolerance 6 (mm) Horizontal Vertical ±<1.0 ±<1.0 Beam Pointing Tolerance (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Horizontal, ±5° Noise (%, rms) (10 Hz to 10 MHz) <0.1 Power Stability 7 (%) (pk-pk) ±<1 Warm-up Time (minutes) <30 CDRH Compliant Yes UTILITY REQUIREMENTS Operating Voltage (VAC)100 to 240 Frequency (Hz)50 to 60 Power Consumption (W)500 Cooling RequirementsHeat sink required Genesis CX Water-Cooled Riser and Chiller, or equivalent ENVIRONMENTAL CONDITIONS Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing -10 to 60°C (14 to 140°F) Relative Humidity 8 (%) 5 to 95 1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. 2 Available in OEM or end user versions. 3 Circularity defined as vertical diameter divided by horizontal diameter. 4 Negative value corresponds to a location inside head. 5 After warm-up over 2 hours. 6 Measured at the output window. Positions are relative to the base and side of the laser as shown in the drawing. 7 Measured over 8 hours. 8 Non-condensing.coherent.com 131 Life Sciences Guide Genesis CX SLM-Series Genesis CX SPECIFICATIONS 1 Genesis CX-514 2 Genesis CX-532 2 Genesis CX-577 2 Genesis CX-590 2 Wavelength (nm) 514 ±3532 ±3577 ±3590 ±3 FWHM Linewidth (MHz) <5 Pulse Format CW Spectral Purity (%) >99 Output Power (mW) 2000, 40002000, 4000, 500020001000 Spatial Mode TEM 00 Beam Quality (M2) <1.1 Beam Circularity 3 1.0 ±0.1 Beam Waist Diameter (mm) (FW, 1/e 2 )2.2 ±0.32.3 ±0.32.3 ±0.32.4 ±0.3 Beam Divergence (mrad) (FW, 1/e 2 ) <0.5 Beam Waist Location 4 (m) ±0.5 Beam Position Stability 5 (μm/°C)<5 Beam Pointing Stability 5 (μrad/°C) <5 Beam Position Tolerance 6 (mm) Horizontal Vertical ±<1.0 ±<1.0 Beam Pointing Tolerance (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Horizontal, ±5° Noise (%, rms) (10 Hz to 10 MHz) <0.1 Power Stability 7 (%) (pk-pk) ±<1 Warm-up Time (minutes) <30 CDRH Compliant Yes ELECTRICAL SPECIFICATIONS Operating Voltage (VAC)100 to 240 Frequency (Hz)50 to 60 Power Consumption (W)500 Cooling RequirementsHeat sink required Genesis CX Water-Cooled Riser and Chiller, or equivalent ENVIRONMENTAL CONDITIONS Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing -10 to 60°C (14 to 140°F) Relative Humidity 8 (%) 5 to 95 1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. 2 Available in OEM or end user versions. 3 Circularity defined as vertical diameter divided by horizontal diameter. 4 Negative value corresponds to a location inside head. 5 After warm-up over 2 hours. 6 Measured at the output window. Positions are relative to the base and side of the laser as shown in the drawing. 7 Measured over 8 hours. 8 Non-condensing.Superior Reliability & Performance 132 Genesis CX SLM-Series Life Sciences Guide Genesis CX MECHANICAL SPECIFICATIONS Dimensions (L x W x H) Laser Head 1 Power Supply (End User) Power Supply (OEM) Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.) 361 x 229 x 180 mm (14.2 x 9.0 x 7.1 in.) 300 x 208 x 97 mm (11.8 x 8.2 x 3.8 in.) 3 m (9.8 ft.) Weight Laser Head Power Supply (End User) Power Supply (OEM) 7.1 kg (15.65 lbs) 6.0 kg (13.23 lbs) 3.8 kg (8.38 lbs) CE MarkingIEC 61010-1/EN 61010-1 1 Back connector not included in laser head length dimension.coherent.com 133 Life Sciences Guide Genesis CX SLM-Series Genesis CX MECHANICAL SPECIFICATIONS 19.38 mm (0.76 in.) 144.93 mm (5.71 in.) 156.06 mm (6.14 in.) 5.56 mm (0.22 in.) 280.57 mm (11.05 in.) 182.88 mm (7.2 in.) 108.9 mm (4.29 in.) 34.93 mm (1.38 in.) 20.65 mm (0.81 in.) 133.38 mm (5.25 in.) 0.0 mm (0.0 in.) 47.28 mm (1.86 in.) 165.38 mm (6.51 in.) 10.0 mm (0.39 in.) 4.78 mm Dia. Thru C’Bore 7.92 mm Dia. X 4.83 mm Deep (0.188 Dia. Thru C’Bore 0.312 in. Dia. X 0.19 in. Deep) (6X) 137.26 mm (5.4 in.) Power On Indicator Manual Shutter 11.94 mm (0.47 in.) Slot 6.38 +0.03/-0.00 mm Wide X 9.7 mm Deep (0.251 +0.001/-0.00 in. Wide X 0.38 in. Deep 6.38 +0.03/-0.00 mm Dia. X 9.7 mm Deep (0.251 +0.001/-0.00 in. Dia. X 0.38 in. Deep 52.85 mm (2.08 in.) 44.75 mm (1.76 in.) 84.51 mm (3.33 in.) 156.06 mm (6.14 in.) Output Beam Heatsink Surface Fan Aux. Control DC Power Ground Lug Genesis CX SLM-Series OEM and End User Head Rear ViewFront View Top View Side View Bottom ViewSuperior Reliability & Performance 134 Genesis CX SLM-Series Life Sciences Guide Genesis CX MECHANICAL SPECIFICATIONS 208.28 mm (8.2 in.) 96.52 mm (3.8 in.) 299.72 mm (11.8 in.) Genesis CX-Series High Current OEM Power Supply Front ViewRear View Top View Side View Bottom View Genesis CX-Series Benchtop Power Supply 159.8 mm (6.29 in.) 19.8 mm (0.78 in.) 361.1 mm (14.22 in.) 228.9 mm (9.01 in.) Side ViewFront Viewcoherent.com 135 Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all Genesis CX SLM lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. ISO 9001 Registered Life Sciences Guide Genesis CX SLM-Series Genesis CX MECHANICAL SPECIFICATIONS Genesis CX SLM-Series Water-Cooled Riser 280.6 mm (11.05 in.) 228.6 mm (9.0 in.) 203.2 mm (8.0 in.) Aux Output Beam Power On Indicator Manual Shutter Control DC Power Ground Lug Cooling Water Fittings 7.92 mm (0.31 in.) Wide Slots (4X) 84.5 mm (3.33 in.) 12.7 mm (0.5 in.) 5.4 mm (0.21 in.) 87.6 mm (3.45 in.) 43.5 mm (1.71 in.) 9.4 mm (0.37 in.) 160.2 mm (6.31 in.) 120.4 mm (4.74 in.) 156.1 mm (6.14 in.) 52.9 mm (2.08 in.) 144.7 mm (5.7 in.) 97.1 mm (3.82 in.) 52.9 mm (2.08 in.) 59.0 mm (2.32 in.) 11.4 mm (0.45 in.) 12.7 mm (0.5 in.) 137.3 mm (5.4 in.) 120.4 mm (4.74 in.) 44.8 mm (1.76 in.) Top View Bottom View Rear View Side View Front ViewSuperior Reliability & Performance 136 OBIS LX/LS Single Laser Remote OBIS LX/LS 6-Laser Remote OBIS LX/LS Laser Box OBIS LX/LS Scientific Remote OBIS LX/LS Heat Sink Sapphire Driver Unit Coherent Laser Accessories Discover More Solutions: Coherent Laser Accessories Life Sciences Guide Accessoriescoherent.com 137 Accessories OBIS LX/LS Scientific Remote Laser Remote and Power Supply for up to Six Lasers OBIS LX and OBIS LS laser products come with a variety of accessories to support your application needs. The OBIS Scientific Remote for OBIS LS and OBIS LX offers all the features from the laser in a convenient CDRH-compliant interface with a touch-screen and internal power supply for up to six lasers. As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand- alone all-in-one laser solution. The OBIS laser comes with a Power Connection, USB Connection, Fan Connection and a SDR-type Connec- tion for laser control I/O. All of these are located on the back panel of the OBIS LX/LS laser. To simplify integration the OBIS Scientific Remote connects to the single SDR-type connector for power, signals, and communication. The OBIS Scientific Remote then brings all of these features to controls and connectors on the Remotes front panel. OBIS Scientific Remote offers a convenient handle to angle the unit for easier display. FEATURES & BENEFITS • Complete remote control of up to six OBIS lasers • Touchscreen interface with audio • Independent voltage inputs for analog and digital modulation signals • USB, RS-232 and Ethernet for additional control from host computer • OBIS connection software for PC • Single SDR connection to each laser • Laser safety features (CDRH) such as key switch and interlock APPLICATIONS • Laboratories that require CDRH features • Applications that require a simple Analog or Digital inputs to control the laser • Applications that require laser control at a remote location away from the laserNext >